Commercial / industrial Disposable Filters

The C&I Disposable is constructed with a rugged, moisture resistant frame, graded density media pad, and metal support grills. This durable product is designed for industrial applications of all types. The C&I Disposable is available with Fiberglass or Polyester media and can be made in an unlimited variety of standard and made-to-order sizes in thickness' of 1/2", 1" and 2"

Automatic Roll Filters

Koch Filter Corporation manufactures replacement Roll Filters for all existing roll filter equipment including: American Air Filter, Roll O Matic*. Continental Conomatic and Conomanual*, Farr Roll Kleen*, Cambridge Electro Aire*, and all other major automatic roll filler and unit ventilator equipment.

Koch Automatic Rolls are availabLe in three grades of glass fiber media and three grades of synthetic media. All six media styLes consist of progres- sively dense fibers supported by an integral scrim backing.

 

 

Bulk Filter Media

Koch offers many different types of filter media, including Polyester, Fiberglass, Foam, and Rubberized Latex. Depending on the media type, these products range in thickness from 1/4" to 4" and are commonly used in commercial and industrial air filter systems. All types are offered in pre-cut pads or bulk rolls. This wide choice of media styles assures the user that there is a Filter media for every need.


Duo-Cube Filters

Three Styles of the Duo-Cube are offered, Standard, Self-Seal, and 3 Ply. All three styles are constructed of high- loft synthetic media.

  The Standard Duo-Cube is designed to fit the wire framework found in many cube applications without modification to existing hardware.
  The Self-Seal Duo-Cube is a wire-framed, self-gasketing product which requires no additional supporting devices.
  The 3 Ply Duo-Cube is constructed of three progressively dense layers of media to provide full depth loading resulting in high dust holding and Long service Life. 3 Ply Duo-Cube filters provide the highest performance characteristics of any selection from the Duo-Cube series.


Duo-Pak 40
Synthetic Pocket Filters

Constructed of high loft synthetic filter media, the is a self-sealing, self-supporting extended surface air filter. Excellent dust holding capacities and compact design make the. ideal product in most HVAC systems, especially as an upgraded replacement for conventional disposable fiLters.

 


Type AR
Filter Holding Frames

Type AR Filter Holding Frames are designed for simple and cost-effec- tive construction of filter banks. 16 gauge galvanized steel components insure years of reliable usage and make each Type AR Frame virtually indestructible. Each frame is equipped with polyurethane gaskets to provide protection against air- bypass. Pre-punched holes in the sides of the frame make fiLter bank construction easy and trouble-free. Because it is built with the end user in mind, the Type AR Filter Holding Frame is the ultimate design for straight filter-bank assembly.

 

MS and MA
Permanent Washable Filters

Type MS Steel and Type MA Aluminum Fillers are constructed with rugged components designed to offer excel- lent filtration performance in HVAC systems, grease hoods, or any appli- cations where a permanent, cLeanabLe air filler is required. Both styles are available in a wide variety of sizes. A special spray adhesive is also offered to further enhance dust holding properties of Type MS and Type MA Permanent filters.

Koch Pad Holding Frames

The Koch Pad and Frame System offers an easy and cost-effective method of achieving proper air filtration. The Pad Frame, constructed of galvanized steel, is permanently placed in the filter bank, and only the low-cost media pad is changed. Pad Frames are available in many sizes, and when used in conjunction with any media, provide a versatiLe, economicaL, and long lasting filter system.